blog

A Comprehensive Guide on How to Change Default Gateway on Ubuntu 20

Changing the default gateway on Ubuntu 20 can seem like a daunting task, especially for those who are less experienced with networking configurations. However, understanding how to manage network settings is crucial for administrators and users alike. In this comprehensive guide, we’ll walk you through the process step-by-step, ensuring that you will become proficient in changing the default gateway. Moreover, we will touch upon relevant concepts like API security, Kong, gateways, and advanced identity authentication to provide you a well-rounded understanding of networking in today’s digital ecosystem.

What is a Default Gateway?

A default gateway is a node (usually a router) on a computer network that serves as an access point to another network. When you send data from your device to an external network (like the internet), the data must first reach the router, which is known as the gateway. It is essential to ensure this gateway is configured correctly, as it directly affects your device’s ability to communicate with devices outside your local network.

Importance of Default Gateway

Why should you care about changing your default gateway? Here are a few reasons:

  • Network Segmentation: In complex networks, multiple subnets may exist, and your device may need to connect to a specific subnet. Choosing the appropriate gateway allows for better network traffic management.
  • Improved Security: Using gateways that support advanced security measures, such as API security and advanced identity authentication, helps in protecting your data. For instance, Kong can serve as an API gateway, ensuring that data transactions adhere to strict security protocols.
  • Performance Optimization: Selecting the right gateway can optimize network performance by reducing latency and improving routing efficiency.

Prerequisites Before Changing the Default Gateway

Before we dive into the technical steps, ensure the following:

  1. Access to Root or Sudo User: You will need administrative privileges to change network settings.
  2. Network Configuration Details: Have the new gateway IP address you plan to set. You may also want to record your current settings before changing anything.
  3. Backup Important Data: Always keep your sensitive data backed up in case something goes wrong during the configuration process.

Steps to Change Default Gateway on Ubuntu 20

The process of changing the default gateway on Ubuntu 20 can be accomplished through various methods—using the graphical user interface (GUI), the command line (CLI), or editing the network configuration files. Below, we provide instructions for both.

Method 1: Change Default Gateway Using the Command Line

Using the command line is the most straightforward approach:

  1. Open Terminal: You can do this by searching for “Terminal” in the applications menu or pressing Ctrl + Alt + T.

  2. View Current Gateway: First, let’s view your existing gateway:

bash
ip route show

This command will display the current network routing table, where you can identify the default gateway.

  1. Delete the Old Default Gateway: Use the following command to delete the old gateway:

bash
sudo ip route del default via OLD_GATEWAY_IP

Replace OLD_GATEWAY_IP with the current gateway address you want to remove.

  1. Add the New Default Gateway: Now, add the new gateway with the following command:

bash
sudo ip route add default via NEW_GATEWAY_IP

Make sure to replace NEW_GATEWAY_IP with your new gateway’s IP address.

  1. Verify Your Changes: After adding the new gateway, you can check it by running:

bash
ip route show

Method 2: Change Default Gateway Using GUI

If you prefer to use Ubuntu’s graphical interface, follow these steps:

  1. Open Settings: Click on the network indicator in the upper right corner of your screen and select “Settings”.

  2. Select Network: Choose the network interface you wish to adjust (e.g., Wired or Wi-Fi).

  3. Edit the Network Settings: Click on the gear icon next to your active network connection.

  4. IPv4 Settings: Under the “IPv4” tab, you will see the option for “Routes”.

  5. Add New Gateway: Click on “Routes…” and edit to add your new gateway.

  6. Save Changes: Click on “Apply” to confirm your changes and close all dialog boxes.

Method 3: Edit Network Configuration Files

  1. Open Terminal: Launch your terminal as shown earlier.

  2. Edit the Netplan Configuration: The network settings are configured under YAML files in /etc/netplan/. Use a text editor to modify the configuration file. Check which configuration file exists by running:

bash
ls /etc/netplan/

Then edit the found file:

bash
sudo nano /etc/netplan/01-netcfg.yaml

  1. Modify the Configuration: Within the file, look for the section that starts with network:, followed by ethernets: and the name of your interface. It should look something like this:

yaml
network:
version: 2
ethernets:
eth0:
dhcp4: yes

Insert the following code below the eth0 entry:

yaml
routes:
- to: 0.0.0.0/0
via: NEW_GATEWAY_IP

Replace NEW_GATEWAY_IP with your new gateway.

  1. Apply Changes: After saving your changes (in nano, you can do this with Ctrl + O, then exit using Ctrl + X), apply them by executing:

bash
sudo netplan apply

  1. Verify Changes: Finally, confirm that your gateway has been updated by checking the routing table:

bash
ip route show

Troubleshooting Common Issues

If you encounter issues after changing the default gateway, consider the following troubleshooting steps:

  • Check Network Connectivity: Ensure that your new gateway is reachable. Pinging the gateway can help diagnose connectivity.

bash
ping NEW_GATEWAY_IP

  • Revisit Configuration: Double-check your configuration files or settings to ensure accuracy.

  • Use Logs for Insight: Reviewing logs is crucial. Run:

bash
journalctl -u NetworkManager

This will provide helpful output related to the Network Manager and may reveal issues that occurred during the configuration.

Understanding API Gateway Security

While changing the default gateway is essential for your local network, API gateways are equally important when it comes to managing and securing application data.

API Security: Why It Matters

In modern applications, APIs facilitate communication between different services. This is where API security becomes imperative. With potential threats such as data breaches, API abuse, and other vulnerabilities, ensuring secure API management through gateways is crucial for safeguarding sensitive information.

The Role of Kong in API Management

Kong is a popular open-source API gateway that handles requests by routing and transforming data while ensuring high-performance security measures, such as rate limiting, logging, and access control. Implementing Kong can offer significant performance advantages and security enhancements.

Advanced Identity Authentication

For APIs handling sensitive transactions, implementing advanced identity authentication is vital. This involves ensuring that only authenticated and authorized users gain access to specific services. Techniques such as token-based authentication (e.g., JWT) and OAuth can add extra layers of security to your API.

Summary

In this comprehensive guide, we covered the processes for changing the default gateway on Ubuntu 20, outlined the importance of default gateways in networking, and explored how API security and gateways like Kong contribute to the secure management of digital communications.

By following the steps detailed within this guide, you should feel confident in adjusting your networking settings while also understanding the broader implications of your actions in the context of API security and data integrity.

APIPark is a high-performance AI gateway that allows you to securely access the most comprehensive LLM APIs globally on the APIPark platform, including OpenAI, Anthropic, Mistral, Llama2, Google Gemini, and more.Try APIPark now! 👇👇👇

Additional Resources

Resource Type Description
Official Ubuntu Docs Comprehensive documentation on Ubuntu networking
API Security Best Practices Book detailing the nuances of API security
Kong Documentation The official Kong documentation for API management

Understanding these crucial aspects of networking and security can significantly enhance your tech expertise and the integrity of your systems. From changing settings on Ubuntu to employing secure API practices, you’re now equipped for ongoing success in your networking endeavors!

🚀You can securely and efficiently call the Claude(anthropic) API on APIPark in just two steps:

Step 1: Deploy the APIPark AI gateway in 5 minutes.

APIPark is developed based on Golang, offering strong product performance and low development and maintenance costs. You can deploy APIPark with a single command line.

curl -sSO https://download.apipark.com/install/quick-start.sh; bash quick-start.sh

APIPark Command Installation Process

In my experience, you can see the successful deployment interface within 5 to 10 minutes. Then, you can log in to APIPark using your account.

APIPark System Interface 01

Step 2: Call the Claude(anthropic) API.

APIPark System Interface 02