blog

A Step-by-Step Guide on How to Change Default Gateway on Ubuntu 20

Changing the default gateway on Ubuntu 20 is an important task that system administrators often need to carry out for a variety of reasons. This may include improving network performance, managing network traffic, or simply changing the network configuration to meet project requirements. In this article, we will provide a comprehensive guide on how to change the default gateway on Ubuntu 20, while also incorporating discussions of related topics such as API calls, API Open Platform, and Oauth 2.0.

What is a Default Gateway?

Before we dive into the steps for changing the default gateway on Ubuntu 20, let’s clarify what a default gateway is. A default gateway is the device that routes traffic from your local network to external networks, such as the internet. It acts as an access point or a “gate” from the local network to the broader internet. Typically, this is your router’s IP address.

Importance of Changing the Default Gateway

There are several scenarios in which you may need to change your default gateway:
Network Reconfiguration: When adding new devices or changing network setups.
Performance Improvement: Selecting a gateway that can route traffic more efficiently can lead to performance gains.
Troubleshooting: Sometimes, current configurations may lead to connectivity issues, necessitating a change in the gateway.

Step 1: Check Your Current Network Configuration

Before making any changes, it is essential to know your current networking setup. Open a terminal and run:

ip route

This will display your current routing table, including the default gateway. Look for a line that starts with “default via,” which indicates your current gateway.

Step 2: Change the Default Gateway Using Terminal

Method 1: Using the ip Command

You may change the default gateway temporarily using the ip command. This change will not persist after a reboot. Use the following command:

sudo ip route change default via NEW_GATEWAY_IP

Replace NEW_GATEWAY_IP with the IP address of the new default gateway you wish to set. After executing this command, verify the change by running the ip route command again.

Method 2: Using the route Command

Another temporary way to change the default gateway is through the route command:

sudo route add default gw NEW_GATEWAY_IP

Again, replace NEW_GATEWAY_IP with your desired gateway IP.

Step 3: Make the Change Permanent

If you wish to make the default gateway change permanent, you need to edit the netplan configuration files. These files are located in the /etc/netplan/ directory. Use the following command to navigate to this directory:

cd /etc/netplan/

You will see a YAML configuration file in this directory (for example, 01-netcfg.yaml). Open it using a text editor such as nano:

sudo nano 01-netcfg.yaml

In this file, you will need to locate the ethernets section and specify the new gateway. Here’s an example configuration that includes a default gateway:

network:
  version: 2
  ethernets:
    eth0:
      dhcp4: no
      addresses:
        - 192.168.1.100/24
      gateway4: NEW_GATEWAY_IP
      nameservers:
        addresses:
          - 8.8.8.8
          - 8.8.4.4

Make sure to replace NEW_GATEWAY_IP, 192.168.1.100 (your local IP address), and the nameservers if necessary.

After making the changes, save the file (in nano, you would do this with CTRL + O and then CTRL + X to exit).

Now apply the changes with the following command:

sudo netplan apply

Step 4: Verify Changes

Again, to ensure your changes took effect, use the command:

ip route

You should see the new default gateway listed in the output.

Step 5: Troubleshooting Connectivity Issues

If you encounter any issues following the changes, here are a few tips:
Check the IP Settings: Ensure your IP configuration does not conflict with others on the network.
Ping the Gateway: This can help determine if the gateway is reachable. Use:
bash
ping NEW_GATEWAY_IP

Review Configuration files: Errors in configuration files can lead to connectivity issues.

Related Topics: API Calls and Networking

When managing a network or serving API requests, understanding the default gateway is crucial. If your application relies on external APIs, having a reliable gateway ensures that requests can traverse the internet without interruptions.

API Calls and Oauth 2.0

In the context of API development and access management, Oauth 2.0 can be very relevant. Oauth 2.0 is an authorization protocol that allows third-party services to exchange data on behalf of a user. By ensuring that your network facilitates proper API calls while maintaining security protocols like Oauth 2.0, you reduce the risk of vulnerability.

Moreover, organizations may utilize an API Open Platform to ensure that their APIs can be centrally managed and accessed securely. This permits easier integration of various services and enhances performance.

Feature Description
API Calls Requests made to access external services
Amazon APIs APIs provided by Amazon for various services used in cloud computing
API Open Platform Centralized management of multiple APIs
Oauth 2.0 Security protocol for managing access tokens in API calls

Conclusion

Changing the default gateway on Ubuntu 20 is a straightforward process that involves several steps, from checking your current configuration to editing netplan configurations for permanent change. By understanding the relationship between network configurations and API management, you can ensure a robust setup for any applications or services you deploy.

Next, we will cover more advanced topics related to networking, including further enhancements and configurations, and “

APIPark is a high-performance AI gateway that allows you to securely access the most comprehensive LLM APIs globally on the APIPark platform, including OpenAI, Anthropic, Mistral, Llama2, Google Gemini, and more.Try APIPark now! 👇👇👇
” .

For any questions or further clarifications, feel free to leave a comment below! Happy networking with Ubuntu 20!

🚀You can securely and efficiently call the 月之暗面 API on APIPark in just two steps:

Step 1: Deploy the APIPark AI gateway in 5 minutes.

APIPark is developed based on Golang, offering strong product performance and low development and maintenance costs. You can deploy APIPark with a single command line.

curl -sSO https://download.apipark.com/install/quick-start.sh; bash quick-start.sh

APIPark Command Installation Process

In my experience, you can see the successful deployment interface within 5 to 10 minutes. Then, you can log in to APIPark using your account.

APIPark System Interface 01

Step 2: Call the 月之暗面 API.

APIPark System Interface 02